Where to get satellite dish

A dish placed high up will get a clear, unimpeded view of the sky. Most people choose a point on an eave or fascia board that works, or drill straight into the side of the house.

Personally I like to use dishpointer. The map gives you real overhead photography with lines that show where the satellite is in relation to your location. Fortunately, satellites don't move much, so you can use a positioning database to adjust your dish. The site will give you the precise positioning needed for your dish to receive the signal. You won't be able to receive a signal from a distant satellite.

Don't expect to reach a Chinese satellite if you're in North America, for instance. Use the azimuth number to rotate the satellite.

Have a compass handy and locate true north first. Then, look at the azimuth number and find where that is on the compass. North is considered 0 degrees, east is 90 degrees, south is degrees, and west is degrees. Rotate the satellite dish horizontally until it points in the correct direction. Then, turn the satellite southwest from there. Move the dish vertically to adjust its elevation. Once you know the height needed to reach the satellite, go behind the dish.

Examine the end of the mount where it connects to the dish. You will see a bolt inside a slot labeled by degrees, usually 10 to Loosen the bolt by twisting it counterclockwise, then reposition the dish to the proper elevation.

Moving the bolt along the slot raises or lowers the dish. For instance, if the dish requires a degree elevation, it will point up into the sky almost as much as it possibly can. Slide the loosened bolt back toward the degree marker. Adjust the dish's polarization until you get a clear signal.

The final part that needs to be adjusted is LNB, responsible for receiving and sending the signal into your home. It is usually an arm on the front that points toward the dish. Test out the signal quality by hooking the dish up to the receiver and a TV, then loosen the connecting nut on the arm by turning it counterclockwise with a wrench. If the TV is far away, have someone else stand near it and give you feedback. You may need to wait to adjust the LNB until you're done with the wiring. Take care of it before then, if you're able, so you don't have to keep climbing on the roof to make adjustments.

The LNB can sometimes be controlled by turning a mount part on the back of the dish left or right. Part 4. Check your home first for a previously-used cable opening.

The dish's cable needs its own little space to enter your home and hook up to your TV. Unless your home is in the process of being built, drilling a single hole is the easiest way to do this. Position your TV and the satellite receiver nearby to prepare for the connection. It needs to be below the frost line, the lowest point that freezes in winter, which is about 3 in 7.

Run a coaxial cable from the LNB to the receiver. Make sure the receiver is positioned close to the satellite to ensure the cable can reach it. TV service providers will also give you one when you buy a satellite from them. The coaxial cable sometimes connects to the back of the satellite. Usually, though, it plugs directly into the LNB. Once the cord is in place, your TV will be able to receive the satellite signal.

Turn on the TV to see if it works. The receiver may plug directly into the TV instead. Consult a wiring guide for specific instructions on how to connect the satellite, receiver, and your TV. If you bought the satellite from a TV service provider, they would also provide a wiring guide.

Turn on the TV to test the signal. Press the satellite button if your remote has one or navigate to the settings menu. You should be able to get a picture right away. If the signal quality is poor, make sure you positioned the satellite dish correctly.

Adjust it to get the clearest possible signal! Please note the azimuth, elevation, and LNB numbers and compare them to the satellite's location. Include your email address to get a message when this question is answered. Ask TV service providers for an install. Many of them offer free installations as long as you buy a subscription for their service. Helpful 2 Not Helpful 0. Find spots to hide loose cables in your home.

If the satellite dish's cable is exposed, put furniture and other decorations in front of it. Helpful 1 Not Helpful 0. Every satellite receiver needs a separate coaxial cable.

Antennas can be mounted two different ways, depending on where they are needed to be used. Both internal and external antennas are sold on eBay. Internal antennas are made to capture TV signals inside the home. They are required for homes that do not have a good mounting space outdoors. Outside antennas capture the signal easier than indoor antennas, but they are mounted outside and require longer cables. The internal antennas are appropriate for people who live within miles of broadcast towers and have a strong signal.

For those that are at a further distance, an outside antenna will usually work better. Frequency coverage is an important factor when getting an antenna. Places that use UHF signals will require an antenna with a wider band acceptance or log periodic antennas.

Digital antennas, on the other hand, are ones that capture more of the TV band used instead of receiving digital or analog broadcasts. One of the important parameters of antennas is the gain.

This is the sensitivity that the antenna has towards specific directions. The higher the gain value, the better it is at picking up weaker signals.

However, as the gain increases, the antenna must be more accurately directed to the correct direction of the TV transmitter. This makes the antenna less likely to be interfered with by signals coming from different directions than the one chosen. Gains are measured in dB or decibels.

The higher value will show a higher gain. Skip to main content. Shop by Category. Shop by Type. See All - Shop by Type. Shop by Features. See All - Shop by Features. Best Selling. See All - Best Selling. All Auction Buy It Now. View: Gallery View. Type Antenna see all. Maximum Range. Satellite TV is a great option for the home, but it really shines on the road.

There are a lot of satellite dishes and antennas on the market, and figuring out what exactly you need for your RV and tailgate can be tough. To help you out, our team at CableTV.

These powerful dishes are loaded with features to provide you with a full range of channels, including automatic satellite tracking, support for multiple TVs and receivers, and the ability to receive signals from several satellites at once. One-button operation. When you want to watch, just hit a button and the satellite dish will find and lock onto a satellite signal for the best possible picture.

These are domed antennas, which means the satellite receiver dish is protected by a rounded cover. This allows them to be used while driving, unlike the Winegard SK dishes. If all you need is a no-frills, portable satellite dish that you can grab and go, the Satellite Oasis Tripod Kits are an excellent choice. These dishes come with a carrying case, tripod, and everything you need to hook them up.